Recording- Tech

Step 1
I used a pencil to sketch and a ruler to make a full size working drawing of my box.

Step 2
I used a ruler to copy  the measurements from my drawing onto the paper.

Step 3
I marked a square line at (90 degrees) across by using a trisquare.

Step 4
I then cut off the first piece of wood by using a saw .

Step 5
I then cut out the joints by using a chisel.

Step 6
I put a peace of wood on the joint and glued it in.

Step 7
I then waited 30 minutes for it to dry so then Mr Grundy stuck a peace of thin wood to the side of my project using glue.

That was the last step for my project but I had more to do. But time was over and Mr Grundy said he will finish it of.